MGT-512460
48V Class · 460 Ah LiFePO4 battery pack — direct-replacement footprint for the lead-acid battery in your truck.
51.2 VNominal
460 AhRated capacity
23.55 kWhEnergy
202 kg / 445 lbWeight
IP54Ingress
Photos show the standard build of this pack family. Dimensions and interfaces for MGT-512460 are the ones in the drawing below.
Why this pack
- Drop-in replacement designEngineered to occupy the same compartment as the lead-acid battery it replaces. Send your truck model — you get a proposed pack and an indicative price range within 24 hours.
- CATL LiFePO4 cellsAutomotive-grade prismatic cells from CATL, matched and sorted before assembly.
- Opportunity chargingTop up during breaks without the lead-acid cycle-depth penalty — the pack doesn't need to be swapped or cooled down first.
- Zero watering, zero equalizingNo electrolyte maintenance. Your operators stop touching batteries entirely.
- Sealed IP54 enclosureFine-texture black steel (RAL 9017), dust and water protected for warehouse and yard conditions.
| Charging | REMA 320 female (no handle) |
| Discharging | Connector per drawing (type confirmed at fit check) |
| Interfaces & extras |
|
Specifications — MGT-512460
| Item | Value |
|---|---|
| Cell chemistry | LiFePO4 (lithium iron phosphate), CATL prismatic cells |
| Nominal voltage | 51.2 V |
| Rated capacity | 460 Ah |
| Total energy | 23.55 kWh |
| Weight (approx.) | 202 kg / 445 lb |
| Dimensions (L × W × H) | 780 × 500 × 405 mm (30.7 × 19.7 × 15.9 in) · 372 mm at body, 405 mm at terminal bay |
| Ingress protection | IP54 |
| Enclosure | Steel, black (RAL 9017) fine-texture finish |
| Charging interface | REMA 320 female (no handle) |
| Discharging interface | Connector per drawing (type confirmed at fit check) |
| Display | Integrated |
| Cycle life / warranty | Cell cycle life ≥ 4,000 (cell specification). Pack warranty 6 years / 12,000 hours, ≥75% capacity — warranty terms → |
Typical fit: Class I counterbalance trucks and heavier Class II narrow-aisle equipment — confirm against your compartment with a fit check before ordering.
Dimensioned drawing
View engineering drawing (MGT-512460)
Note: this drawing shows the standard model for reference only. Final dimensions, interfaces and layout depend on the customer's truck and operating conditions, and are confirmed at fit check before production.
Cell build & documents
This pack does not map to a single-string build of a catalogue cell, so we do not publish a cell type against it. Ask us for the bill of materials and we send the exact cell model with its IEC 62619 and UN 38.3 documents — in writing, before you quote.
See the full document register →
See the full document register →
Will it fit your truck? We work it out with you.
Send your truck make, model and battery compartment dimensions. Within 24 hours an engineer comes back with a proposed MGT-48V-class pack, an indicative price range and the points still to verify. If the direction works for you, we refine the configuration — compartment, weight, connector, mounting — and confirm the final fit in writing before production. If it doesn't fit, you hear it from us first.
1You send truck model + compartment size (or just the truck model).
2We match compartment, weight class and connector.
3Proposal and price range within 24 hours; final fit confirmed in writing once you approve.
Start your fit check
Two minutes to send. The truck model is all we need to start — the rest is optional and lives in the same form.
- Truck make & model — one model is enough, or a photo of the data plate
- What you need — a quote, a cost comparison, a fit check, or just a question
- If you have them — compartment, connector, capacity, shifts, fleet size
First reply within 24 hours: a proposed model, an indicative price range, and the points we still need to check with you.
More in the 48V Class
photo soon48V CLASS
photo soon48V CLASS
photo soon48V CLASS
photo soon48V CLASS
48V CLASS
48V CLASS